DIY Coffee Bar

What do you do with a naked sidebar top?

Once I take down the Christmas decorations, this is completely and totally bare. And not useful.

I had the idea to turn it in to a coffee bar.

My regular coffee pot is in the kitchen, but I also own a Keurig and an iced coffee machine. I purchased a coffee sign, a k-cup pod drawer and some wire baskets with a gift card I had.

Shop: Keurig K-Cup Organizer Drawer, Small sturdy basket set with adhesive clips, “Good Days” sign, coffee mugs (similar), milk glass tea set (similar), Keurig coffee machine, and Gourmia iced coffee maker.

The only thing missing is a coffee grinder and a few Torani syrups. What small projects have you completed lately?

24 Days of Christmas: advent calendar DIY

It started with a pile of tiny red mittens, numbered 1-24. They were adorable and very useful- what could I do with them?

So I did what I always do- I found a board. I painted it white and i added some stencils to it.

And I glued 25 little tiny clothespins to it with wood glue.

And then I painted the cute little stenciled areas with acrylic paint.

And I added some vinyl to the bottom.

And I added my cute little mittens to the bottom.

I think the board is a bit narrow, and the only thing I’d change is to use a longer board to space the mittens out further. It’s kind of hard to see the numbers on them like this.

And it didnt turn out too badly. I still may change it next year, but I do think this turned out cute.

Five Beautiful Handmade Ornament Ideas

I don’t know about you, but I love a great handmade ornament. Someday I hope to have an entire tree filled with my children’s handmade creations. These ornaments are simple and cute, and you can definitely make them with your kids.

1. Snowman face ornament

Just take an ordinary Christmas ball and coat it in epsom salt. You may need more than one coat. Then, fashion a “carrot nose” from a pipe cleaner and glue the carrot and two buttons to create the snowman face. Use an infant sock to create the hat.

2. Pine cone ornaments

You can make these ornaments so easily: just get some jute twine, ribbon for bows and some pretty pine cones from your yard. Tie the ribbon into bows and tie the jute twine around the bow knot. Hot glue the bow and hanger to the pine cone. That’s really it!

3. Snow globe ornament

We made these ornaments by gluing a tiny Christmas tree inside an empty clear ball. Then, we added some epsom salt “snow.”

4. Pipe cleaner candy cane

This is by far the easiest ornament on this list, and you can make it with small kids. All you need are red pipe cleaners and white- no glue and no cutting! Simply twist them together and curve them into a candy cane shape.

5. Picture frame initial ornament

Want a super cute gift for a friend or teacher? Go grab some inexpensive small picture frames and stick on letters (or cut them out with a Cricut or Silhouette). Attach a cute piece of ribbon and you are set!

Have fun creating!! What are some of your favorite handmade ornaments?

Scrap wood Challenge: a plan-less chicken coop or rabbit hutch

I never like to build anything without a plan- it’s so difficult and something always turns out wrong. BUT- is it really a scrap wood challenge if you use a plan? It’s still challenging, but building on the fly is a whole ‘nother level of challenging. It’s aggravating.

I knew from looking at a neighbor’s chicken coop about what design I wanted. So I started by creating the bottom with four four by fours cut at 30 inches long. I cut my 1x4s to 24 inches and built a frame. I then used two 1×12 shelf boards to build the nesting box. I cut the sides and the divider to 12 inches and cut one to 30 inches to form the back of the nesting box. I also added a 1×4 board frame to the bottom of the legs for stability and to add the wire later on.

I then added plywood to the bottom, top, and added a floor to the inside of the nesting box. I also created a small door for the coop.

Then, I added a 1×4 frame “chicken run” to the outside of the coop. I also added a plywood roof to the top.

And my youngest daughter decided she should try out the chicken run. 🙂 We started adding wire to the outside until we completely covered the open areas with wire.

And then we added hardware to the doors and egg hatch.

Three coats of paint and several shingles later, we ended up with the final product…which I will show you next week 🙂

Have a wonderful week!! We will see you Wednesday for school lunch ideas and on Friday for Farmhouse Friday.

Installing a Portable Polytunnel Greenhouse Part 2

Last week, we shared our new polytunnel greenhouse. We have been working on it, since it is nearing the time we usually start our seeds for our garden.

This week, we have begun working on the inside. We just need to purchase a heater and install our irrigation system and we will be good to go.

The inside currently looks like this:

Stable mats from Tractor Supply (I used two of them) and poly resin Muscle Tech garage shelves from Walmart. They snap together without tools and are very sturdy.

For the shelves, we purchased 5 5-tier Muscle Tech resin garage shelves. The fifth tier made them too tall so I reduced them to 4 tier and was able to make one more shelf out of them. This way, if these shelves don’t work for the greenhouse, I can repurpose them in our attic or garage. I wanted something with holes for drainage and ventilation that wasn’t expensive, wouldn’t rot or rust and could be used for something else if they didn’t work here.

We have also ordered a potting bench that hasn’t arrived yet.

We are looking at several different heaters and we are leaning toward this one:

And as for hydration:

We are planning to DIY something similar to this.

I can’t wait to show you the finished product! Check back next week!