Scrap Wood Challenge: Finishing the Adirondack Chairs and Tables

This page is not a building plan, or even a tutorial. Think of it as more like an “update.” Remember these chairs?

And do you remember these tables?

Technically only two of our chairs are scrap wood builds, as we actually purchased the lumber to build the other two. The tables are scrap wood builds as well.

I always knew once these chairs and tables were finished, I wanted to paint them a bright color. Since we have a gray house with black shutters, I envisioned a bright red or a navy blue. But before I painted them, I filled in the holes with wood filler, sanded the chairs with 40 grit sandpaper and an orbital sander, and I put two coats of primer.

I learned something while painting these chairs: if you’re painting something that is raw wood and has never been painted or stained, you will need to use a good primer first. I applied two coats of primer to my chairs and tables prior to painting them. You also only need about 45 minutes drying time between both coats.

I let the two coats of primer dry for about 24 hours, and then I applied the red. I just love this color. It’s Benjamin Moore outdoor paint and it’s called “million dollar red.”

I ended up applying two coats to each piece of furniture, and allowing 24 hours drying time between the coats.

Our cute little firepit area is far from finished, but I can’t help but love the way these tables and chairs turned out. The coolest thing is about the whole area is that we built the furniture ourselves. I can’t wait to show you the finished patio. Stay tuned!

4 thoughts on “Scrap Wood Challenge: Finishing the Adirondack Chairs and Tables

Leave a Reply